Residential · Phoenix, AZ
Protect your pavement with asphalt sealcoating from Apex Asphalt Phoenix, serving Phoenix since 2018. We seal residential driveways and commercial lots to slow oxidation, repel water, and keep surfaces easier to clean and maintain.
Prep makes or breaks sealcoating, so we start with the base and the surface condition. We remove dirt and vegetation with blowers, brooms, and pressure washing, then make sure the pavement is dry and sound. Oil spots get treated with a primer or cleaned and mechanically scrubbed so sealer bonds instead of fisheyes. Cracks are routed or cleaned and filled with hot pour rubberized crack filler or asphalt crack sealant as appropriate, and low areas can be corrected with asphalt patching before any sealer goes down.
Phoenix heat and UV punish asphalt, so we select a commercial-grade sealer and apply it at the right film build for the look and protection you want. Our crews use squeegee and spray application methods depending on texture and layout, with careful edge work at garage aprons, sidewalks, and curb lines. For traction, we can broadcast silica sand or an approved aggregate additive, especially on steep driveways or high-turn areas. We finish with clean cut-in lines, barricade the area, and set a cure window based on temperature, shade, and surface porosity.
Customers choose us because the job is run like a paving project, not a quick paint-over. Apex Asphalt Phoenix is licensed and insured, and we provide clear written scopes that call out crack filling, oil-spot prep, number of coats, and cure times. You get straight answers on what sealcoating can and cannot fix, including when alligator cracking or base failure needs patching or resurfacing instead. Our scheduling is tight, our crews keep the site clean, and we use professional spray rigs, squeegees, and traffic-control cones so the finished work looks sharp.
Before we leave, we walk the driveway with you and confirm coverage, edges, and any repaired cracks or patches. You get a written plan for reopen times, typically foot traffic first, then vehicles after the sealer has cured, plus tips for turning tires, parking, and avoiding power steering scuffs during the first days. We also outline a practical maintenance cycle for re-seal based on sun exposure, traffic, and surface wear, not a one-size schedule. The result is a darker, more uniform surface that helps slow raveling, reduces water intrusion, and extends the service life of your asphalt investment.
Yes. We provide a free written estimate after an on-site evaluation of the asphalt, base, and drainage conditions.
Light traffic is often possible after the mat cools and firms up, commonly the same day. Heavier loads and sharp turning should wait longer; we give site-specific guidance based on temperature, thickness, and traffic type.
Yes. We address water issues with grading adjustments, leveling courses, spot milling, edge repairs, and small drainage improvements when feasible, because standing water shortens pavement life.
Yes. We can plan phasing, access lanes, and off-hours work when the site allows, and we coordinate temporary striping and barricades for safety.
Repairs commonly include saw-cut and removal, base reconditioning or replacement, tack coat, hot mix asphalt placement in lifts, compaction with appropriate rollers, and a clean transition to existing pavement.
Asphalt sealcoating is a protective maintenance coat that helps slow oxidation from UV, limit water penetration, and keep your driveway or parking area looking uniform. In Phoenix, heat and sun dry out the asphalt binder faster, which can lead to fading, brittleness, raveling, and early cracking. Apex Asphalt Phoenix provides professional asphalt sealcoating with the surface prep and crack work needed for the sealer to bond and perform, not peel or track.
Sealcoating works best on pavement that is structurally sound. If your driveway has wide alligator cracking, soft spots, or base failure, we will recommend asphalt patching, infrared repair where applicable, or resurfacing before sealcoating. For typical wear, we start by cleaning thoroughly, treating oil contamination, and filling cracks with the correct material, then apply an even coat at the proper spread rate for coverage and durability. Our process targets the real causes of early failure: poor bonding, skipped crack prep, and sealing over dirt or moisture.
Timing matters in the desert. We plan application around temperature and sun exposure so the sealer can cure correctly, and we provide clear reopen guidance for foot and vehicle traffic. You will also get practical tips, like delaying sharp turns and kickstands, using plywood under motorcycle stands, and keeping irrigation off the fresh surface. With routine crack repair and periodic resealing, asphalt sealcoating can extend pavement life, reduce ongoing repair costs, and keep your property looking cared for.
If you want a clean, professional finish and a straightforward scope, request a free written estimate from Apex Asphalt Phoenix. We will review your driveway condition, measure the area, note drainage and oil-spot issues, and recommend the right combination of prep, crack filling, and sealcoating for long-term value.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Phoenix. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
