Commercial · Phoenix, AZ
Keep traffic moving and protect your property value with commercial parking lot paving that holds up to daily loads. Apex Asphalt Phoenix has served Phoenix since 2018, handling new asphalt paving, overlays, patching, and full-depth repairs with a clear scope and a clean jobsite.
Every durable lot starts with the subgrade and base. We excavate failed areas, proof-roll to find soft spots, correct drainage issues, and rebuild with compacted aggregate base (often 6-12 inches depending on traffic and soils). Work is placed and compacted in lifts using skid steers, loaders, plate compactors, vibratory rollers, and pneumatic-tire rollers, then checked for density and stable edges before asphalt goes down.
Phoenix heat and sun punish binders and accelerate oxidation, so the mix design and compaction window matter. We place hot-mix asphalt in proper lifts, typically 1.5-3 inches per lift, and compact to lock the mat before it cools, keeping consistent joints and tight tie-ins at curb, gutter, and concrete pads. After paving, we can mill and overlay, install infrared seam repairs where appropriate, then finish with ADA-compliant striping, stencils, curb markings, and traffic-control planning so your site stays safe and navigable.
Property managers and facility teams choose us because we build around business hours and communicate clearly. Expect a written scope, phasing plans to keep entrances open, and straightforward recommendations on patching vs. overlay vs. full-depth replacement based on pavement section condition, alligator cracking, rutting, and base failure. Our crews show up with commercial-grade equipment, maintain clean edges, and manage haul-off, dump tickets, and site housekeeping so you are not chasing details.
Before we demobilize, we walk the lot with you to confirm slopes, ponding areas, transitions, and joint quality, then review the punch list. You get a clean, drivable surface, clear striping and accessible stalls when included, and guidance on sealcoating timing, crack sealing, and preventative maintenance intervals to extend pavement life. If we phase the work, you also receive a plan for reopening areas, cure times, and protection steps for new asphalt at dumpster pads, loading zones, and high-turn areas.
Yes. We provide a free written estimate after an on-site evaluation of the asphalt, base, and drainage conditions.
Light traffic is often possible after the mat cools and firms up, commonly the same day. Heavier loads and sharp turning should wait longer; we give site-specific guidance based on temperature, thickness, and traffic type.
Yes. We address water issues with grading adjustments, leveling courses, spot milling, edge repairs, and small drainage improvements when feasible, because standing water shortens pavement life.
Yes. We can plan phasing, access lanes, and off-hours work when the site allows, and we coordinate temporary striping and barricades for safety.
Repairs commonly include saw-cut and removal, base reconditioning or replacement, tack coat, hot mix asphalt placement in lifts, compaction with appropriate rollers, and a clean transition to existing pavement.
Parking lot paving is more than fresh blacktop. For retail centers, offices, warehouses, churches, and multi-tenant properties, the pavement has to carry turning loads, shed water, meet ADA access requirements, and present a clean first impression. Apex Asphalt Phoenix delivers commercial paving and repair that starts with honest evaluation, then matches the fix to the failure, from localized patching to mill-and-overlay and full-depth replacement.
If your lot shows potholes, unraveling edges, trip hazards, or constant puddling, the root cause is often below the surface. We inspect drainage patterns, curb lines, and low spots, then identify whether the issue is surface wear, joint failure, or a compromised base. For isolated failures, we saw-cut clean edges, remove unstable material, rebuild the aggregate base, and place hot-mix asphalt with tight joints and thorough compaction. For widespread oxidation and cracking, milling the surface and installing an overlay can reset ride quality and improve water flow without the cost of full reconstruction.
Good parking lot paving also means getting the details right. We build strong transitions at drive lanes and entrances, protect concrete pads and utility structures, and pay attention to truck-turn areas like loading docks and dumpster enclosures. Final striping, accessible stalls, and directional markings help reduce accidents and liability while improving traffic flow.
After completion, we review maintenance that fits your use and budget. Crack sealing, periodic sealcoating, and prompt spot repairs help slow water intrusion and extend service life, especially under extreme heat. When you are ready, we provide a written estimate, a realistic schedule, and a plan to keep your property open and professional throughout the project.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Phoenix. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
